BIOS release 2.3 for NF7/NF7-S/NF7-M  V1.0-V1.2


Release information:

[ENGLISH]

1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With 
   incorrect AWDFLASH version, the GUID will be erased, and leads to 
   IEEE1394 peer to peer function failed. AWDFLASH 8.23K is included 
   in this BIOS package.
2. Fixed the issue that Duron 1.2G and 1.3G will not boot using BIOS
   version 2.2.
3. Add nVidia System Utility support. Please note that only basic functions 
   are supported. Please download the nvsuoem.ini file and install nVidia 
   System Utility with this ini file (put the ini file in the directory 
   where the setup up file for nVidia System Utility is located).
4. Enhanced compatibility with certain WD hard disk.
5. BIOS compile date: 11/28/2003.

[中文]

1. 請使用AWDFLASH 8.23D版以來上進行NF7系列BIOS更新，若使用不正確的
   AWDFLASH 版本來進行更新，將會清除 GUID，導致 IEEE1394 peer to peer 
   功能失效。AWDFLASH 8.23K將包含在此 BIOS內。
2. 修正在 BIOS 2.2 版使用 Duron 1.2G 及 1.3G 無法開機。
3. 增加 nVidia System Utility支援。請注意! 僅支援 nVidia System Utility
   基本功能選項。並請同時下載 nvsuoem.ini 與 nVidia System Utility 一同
   安裝 (請先將 ini 檔放置在準備安裝 nVidia System Utility 所在的資料夾
   內，之後再進行安裝)
4. 增加對特定WD硬碟的相容性
5. BIOS 日期: 11/28/2003.

*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "nf723.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================