BIOS release 1.5 for NF7/NF7-S        v1.0/V1.1
                                      NF7/NF7-S/NF7-M  v1.2 

Release information:

[ENGLISH]

0. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With 
   incorrect AWDFLASH version, the GUID will be erased, and leads to 
   IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in 
   this BIOS package. 
1. First release for NF7/NF7-S/NF7-M v1.2 board.
2. It shows real frequency of CPU while POST after bios checksum error or 
   setup CPU speed as "User Define".
3. It shows real frequency of memory rather than DDR 266/333 while POST 
   after setup CPU speed as "User Define".
4. Remove IRQ9 item from IRQ Resources because it is occupied by ACPI 
   controller.
5. Revise the issue of OnBoard VGA ROM displays "Engineering..."
6. BIOS Compile Date: 1/22/2003.



[中文]

0. 請使用 AWDFLASH 8.23D 或更新版本來更新 NF7 系列主機板之 BIOS。 使用
   不適當版本的 AWDFLASH 程式，會消除 GUID 並導致 IEEE1394 peer to peer
   功能失效。 AWDFLASH 8.23D 已包含在本 BIOS 自解檔案中。
1. NF7/NF7-S/NF7-M v1.2 首次發行.
2. 當checksum error 或 CPU speed 選User Define時，在POST時只顯示目前CPU
   實際頻率。
3. 修改當CPU Speed 選User Define時，在POST時只顯示目前 Memory實際頻率。
4. 取消 IRQ Resources 的 IRQ9 項目。
5. 修改OnBoard VGA ROM 顯示 "Engineering" 字串的問題。
6. BIOS 日期: 1/22/2003。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "nf715.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================