BIOS release CN for KX7-333/KX7-333R V1.0 Release information: [ENGLISH] 1. Change the SSID of KX7-333/KX7-333R to 7411h/7412h. 2. Fix the issue that the system will hang at post code C3 after clear CMOS when using Samsung DDR K4H560838D module. 3. Fix the issue that the BIOS SSID will be changed after resume from ACPI S3 state. 4. Change the default year after clear CMOS to 2003. 5. Add AMD Duron 1400(133)/1600(133)/1800(133) support. 6. Change the wording "DDR SDRAM at DIMM" to "DDR at DIMM" in order to match the wording on the PCB. 7. Change the BIOS of HPT 372 to version 2.34 for 48-bit LBA support (HDD size larger then 137GB). The RAID function is for KX7-333R only. This BIOS version is also for non-RAID boards and HPT BIOS will be automatically disabled while RAID controller chip is not detected. 8. BIOS compile date: 08/29/2003. [中文] 1. 修正 KX7-333/KX7-333R SSID 為 7411h/7412。 2. 解決 Samsung DDR K4H560838D Module 在Clear CMOS 後會當在 C3 的問題。 3. 修正前版 BIOS SubSystem ID 會在 ACPI S3 resume 回來後被改變的問題。 4. 修改 Clear CMOS 後預設年份為 2003 年。 5. 增加 AMD Duron 1400(133)/1600(133)/1800(133) 支援。 6. 修正 "DDR SDRAM at DIMM :" 文字為 "DDR at DIMM:" 並符合 PCB 上的文字。 7. 更換HightPoint HPT372 BIOS 為 v2.34。以支援48 Bit LBA (支援容量超過 137G的硬碟)。本 BIOS 同時適用於非 RAID 之主機板上。當 BIOS 偵測到您使用 的主機板不含RAID 時將會自動 disable HPT BIOS。 8. BIOS 日期: 8/29/2003。 ********************************* NOTE ********************************* 1. How to upgrade BIOS: a. Boot into MS-DOS or "Safe mode and command prompt" if you are using Windows95/98 b. Run "kx7cn.exe" to extract all files. c. Run "runme.bat" *** Please notice that we suggest you flashing the bios with switches "/py /sn /cd /cp /cc /cks /R" or by "runme.bat". d. For more detail, please visit: http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese) http://fae.abit.com.tw/eng/download/bioshelp.htm (English) 2.After BIOS updated, pull off the power cord and then clear the CMOS data via jumper before restarting system please. ============================================================================