BIOS release 1.9 for KV8-Pro V1.0/1.1

Release information:

[ENGLISH]

1. Update uGuru Utility to ukv8_022.bin.
2. Added "Delay Transactions" item.
3. Added "PCI Latency Timer function" item.
4. Removed an error message if modify year and SAVE&EXIT.
5. Fixed an issue that while press TAB key skip OSB logo the Memory
   Information & memory Clock would missing.
6. Changed "USB 2.0 Controller" defaulted to "Enabled", and synchronize
   with "OnChip USB Controller" setting.
7. Synchronize "DDR Voltage" & "SB Voltage" in PC Health item if been
   modified.
8. Changed "Resume by OnChip USB" default to "Enabled".
9. Changed "ACPI Suspend Type" default to "S3".
10. Added DMI information.
11. BIOS compile date: 11/12/2004



[中文]

1. 更新 uGuru Utility 至 ukv8_022.bin.
2. 新增 "Delay Transactions" item.
3. 新增 "PCI Latency Timer function" item.
4. 修正當修改年份後儲存離開會出現錯誤的訊息.
5. 修正當按下 TAB 鍵顯示開機訊息時 Memory Information 及 memory Clock 
   會消失的問題.
6. 更改 "USB 2.0 Controller" 預設為 "Enabled", 且與 "OnChip USB
   Controller" 設定同步.
7. 將 "DDR Voltage" 及 "SB Voltage" 設定與 PC Health 選項同步.
8. 更改 "Resume by OnChip USB" 預設至 "Enabled".
9. 更改 "ACPI Suspend Type" 預設至 "S3".
10. 新增 DMI 資訊.
11. BIOS 日期: 11/12/2004


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "kv8p19.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================