BIOS release 1.7 for KV8-Pro V1.0/1.1

Release information:

[ENGLISH]

1. Update uGuru Utility to KV8_020.BIN.
2. Fixed some item in Voltage Monitoring can't modify.
3. Support D0 stepping CPU.
4. Fixed some FAN EQ item can't adjustable.
5. Update SATA ROM to V4.31.
6. Fixed an issue that if press TAB key to cancel OSB logo would into
   SATA setup menu.
7. Fixed an issue that after setting CPU frequency & back to check would
   loss 1 MHz.
8. Calibrate CPU temperature.
9. BIOS compile date: 10/12/2004


[中文]

1. 更新 uGuru 至 KV8_020.BIN.
2. 修正部分 Voltage Monitoring 選項無法調整.
3. 支援 D0 stepping CPU.
4. 修正部分 FAN EQ 選項無法調整.
5. 更新 SATA ROM 至 V4.31.
6. 修正當按下 TAB 鍵取消 OSB logo 後會進入 SATA 的設定畫面.
7. 修正當設定完CPU頻率後會少1 MHz的問題.
8. 校正 CPU 溫度.
9. BIOS 日期: 10/12/2004


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "kv8p17.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================