BIOS release 1.4 for KV8-PRO V1.0

Release information:

[ENGLISH]

1. System will load fail-safe default by pressing "F1" after CMOS is
   cleared.
2. Fixed the issue that system may hang when accessing to ABIT EQ at
   certain situation.
3. Fixed CPU temperature too high issue for some types of AMD CPU.
4. Revised the maximum DRAM voltage to 2.8V.
5. Revised default NB voltage to 1.55V.
6. BIOS compile date: 05/22/2004



[中文]

1. 在清除 COMS 之後重新開機按 "F1" 將會以 "fail-safe default"繼續進行動作。
2. 修正在部分情況下進入 ABIT EQ 溫度監控會卡住的問題。
3. 校正對於部分AMD CPU 溫度太高的問題。
4. 修改 DRAM 最高電壓至 2.8伏特。
5. 修改北橋預設電壓至 1.55V。
6. BIOS 日期: 05/22/2004



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "kv8p14.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================