BIOS release 1.3 for KN9 SLI, KN9-S, KN9-Ultra

Release information:

[ENGLISH]

1.	Fixed the issue that the system sometimes hangs on POST. code 50 when install the FX62 with USB device.
2.	Fixed the issue that the system performance may drop off when install a PCI device.
3.	BIOS compiled date: 07/13/2006




[中文]

1.	修正當使用FX62與USB裝置時，有時無法開機的問題.
2.	修正當安裝PCI裝置後，系統效能低落的問題.
3.	BIOS compiled date: 07/13/2006





*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "KN913.ZIP" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================