BIOS release 1.5 for  KD7-G  V1.0


Release information:

[ENGLISH]

1. Change "CPU Disconnect Function" default setting.
2. Add AMD Duron 1400(133)/1600(133)/1800(133) support.
3. Fix the issue that the system occasionally hangs at post code 26
   if the system is using 133/166 FSB CPU and the power was turned off
   during boot up procedure when the post code is AE.
4. BIOS compile date: 08/28/2003.

[中文]

1. 修正 "CPU Disconnect Function" 選項，預設為 Disable。
2. 增加支援 AMD Duron 1400(133)/1600(133)/1800(133) 。
3. 修正使用 133/166 外頻CPU開機時 postcode 執行到 AEh 時，關掉電源後再開機
   偶而會當在 postcode 26h 的問題。
4. BIOS 日期: 8/28/2003。

*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "kd7g15.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================