BIOS release 1.3 for KD7G V1.0
                                    

Release information:

[ENGLISH]

1. Follow AMD's recommendation that "CPU Disconnect Function" should be 
   implemented to make CPU slow down in idle state, and the default 
   value sets up to Enable.
2. Follow AMD's recommendation to revise the trigger timing of LM90 
   for Palomino CPU(model 6).
3. Updates Silicon Image Serial ATA RAID BIOS to 4.2.12.
4. Support Barton 2600+(333 FSB) and Thorton2000+(266FSB) / 2200+(266FSB)
   / 2400+(266FSB) / 2600+(333FSB).
5. Revises some CPU frequency(1466,1666,1916,2166)to be AMD officially 
   suggested figures (1467,1667,1917,2167).
6. BIOS compile date 4/02/2003.

[中文]

1. 應 AMD 要求,增加 "CPU Disconnect Function" 選項, 預設值為 Enable。
2. 應 AMD 要求,修正 LM90 對 Palomino CPU (Model 6) 會提早發出 Critical 
   Alarm 的問題。
3. 更換 Silicon Image Serial ATA RAID BIOS 為 4.2.12。
4. 修正 SoftMenu 並支援 Barton 2600+(333) , Thorton 2000+(266) / 2200+
   (266) / 2400+(266) / 2600+(333) 。
5. 更改部份 CPU 頻率顯示 (1466,1666,1916,2166) 為AMD 官方建議值 (1467,
   1667,1917,2167) 。
6. BIOS 日期:4/02/2003。

*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "kd7g13.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================