BIOS release 1.1 for IS7-V2 1.0


Release information:

[ENGLISH]

1. Update CPU Micro Code.
2. Shows MAC Address of onboard LAN chip in System Configuration section.
   If "Onboard Network Controller" is disabled.
3. Add AWDFLASH v8.32 support "ALT+F2" hot key function.
4. Enhance compatibility with certain Power Supply.
5. Calibrate CPU temperature.
6. Add "PWM Shutdown Temperature" Item.
7. Add "PWM Warning Temperature" Item.
8. BIOS compile date: 05/14/2004



[中文]

1. 更新 CPU Micro Code.
2. 當 "Onboard Network Controller" 關閉時,MAC Address 仍會出現在
   System Configuration 中.
3. 新增 AWDFLASH v8.32 支援 "ALT+F2" 熱鍵功能.
4. 增加對部分電源供應器的相容性.
5. 校正 CPU 溫度.
6. 新增 "PWM Shutdown Temperature" 選項.
7. 新增 "PWM Warning Temperature" 選項.
8. BIOS 日期: 05/14/2004



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "IS7V211.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================