BIOS release 1.3 for  IS7-V  V1.0

Release information:

[ENGLISH]

1. Fixed the problem that the system cannot boot into Windows if
   A. The OS is installed in the SATA hard disk when both the SATA and
      PATA hard disk are present.
   B. The PATA hard disk is removed after the OS installation.
2. Update Prescott CPU micro code.
3. Change the default year to 2004.
4. Update Intel OSB logo.
5. BIOS compile date: 02/23/2004.


[中文]

1. 修正當 SATA 及 PATA 硬碟同時存在時，並將作業系統安裝在SATA硬碟上，之後
   再將 PATA 硬碟移除後無法開機之問題。
2. 新增 Prescott CPU 的micro code。
3. 更改預設年份為 2004。
4. 更新 Intel OSB logo。
5. BIOS 日期：02/23/2004。



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "is7v13.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================