BIOS release 1.2 for  IS7-V  V1.0

Release information:

[ENGLISH]

1. Update CPU micro code.
2. Add Pentium 4 Extreme Edition support.
3. Fixed the problem that CAS latency can not be set manually when the 
   CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
4. Fixed the problem that system will reboot when the "Resume by Alarm" 
   is enabled and user pressed power button to shutdown the system 
   during POST.
5. Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are 
   connected to SATA1 or SATA2 (ICH5 SATA channels).
6. BIOS compile date: 11/06/2003


[中文]

1. 更新 CPU micro code。
2. 新增支援 Pentium 4 - Extreme Edition。
3. 修正當 CPU:DRAM 為 PSB800/5:4 或 PSB800/3:2 時，以手動調整 CAS Latency 
   值，會有無法設定的問題。
4. 修正當啟用 "Resume by alarm" 選項並在 POST 過程中按 power button 關機後，
   系統會重新啟動之問題。
5. 修正當 200/250/300 GB SATA 硬碟連接在 SATA1 或 SATA2 (ICH5 SATA channels) 
   時會偵測為 136GB 的問題。 
6. BIOS日期: 11/06/2003。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "is7v12.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================