BIOS release 1.4 for IS7-M V1.0 Release information: [ENGLISH] 1. Fixed the error message "CPU is unworkabled" for P4 Prescott 2.4G (533MHz/ 1M L2/ 90nm) CPU. Please follow below steps to update BIOS. A. Press key to continue booting when error message "CPU is unworkabled" show on screen. B. Boot up the system from bootable floppy disk and then update BIOS. 2. BIOS compile date: 03/12/2004. [中文] 1. 修正當使用P4 Prescott 2.4G (533MHz/ 1M L2/ 90nm) CPU 會出現"CPU is unworkabled" 的錯誤訊息。請依照下例步驟更新BIOS。 A. 當螢幕出現 "CPU is unworkabled" 訊息時按下 繼續進行開機程序。 B. 自磁片開機並且進行更新BIOS動作。 2. BIOS 日期 : 03/12/2004。 ********************************* NOTE ********************************* 1. How to upgrade BIOS: a. Boot into MS-DOS or "Safe mode and command prompt" if you are using Windows95/98 b. Run "is7m14.exe" to extract all files. c. Run "runme.bat" *** Please notice that we suggest you flashing the bios with switches "/py /sn /cd /cp /cc /cks /R" or by "runme.bat". d. For more detail, please visit: http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese) http://fae.abit.com.tw/eng/download/bioshelp.htm (English) 2.After BIOS updated, pull off the power cord and then clear the CMOS data via jumper before restarting system please. ============================================================================