BIOS release 1.2 for IS7-M  V1.0


Release information:

[ENGLISH]

1. Fixed the problem that the system cannot boot into Windows if
   1) The OS is installed in the SATA hard disk when both the SATA and
      PATA hard disks are present.
   2) The PATA hard disk is removed after the OS installation.
2. Update BBS code. This will fix some boot sequence issue with some SCSI
   card.
3. Update CPU micro code.
4. Add notification when none 80-wire cable is installed.
5. Change the default year to 2004.
6. Update Intel OSB logo.
7. BIOS compile date: 02/13/2004



[中文]

1. 修正當滿足以下兩個條件時，系統無法開進 Windows 作業系統，
   1) ATA 硬碟上安裝作業系統時，且系統上同時存在 SATA 跟 PATA 硬碟。
   2) 裝完作業系統後移除 PATA 硬碟。
2. 更新 BBS 程式碼，增加對部分SCSI卡開機順序支援。
3. 更新 CPU micro code。
4. 增加當使用非 80-wire 排線時之注意字串。
5. 更改預設年份為 2004。
6. 更新 Intel OSB logo。
7. BIOS日期：02/13/2004



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "is7m12.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================