BIOS release 2.0 for IS7/IS7-E/IS7-G  V1.0


Release information:

[ENGLISH]

1. Update CPU Micro Code.
2. Shows MAC Address of onboard LAN chip in System Configuration section.
   If "Onboard Network Controller" is disabled.
3. Add AWDFLASH v8.32 support "ALT+F2" hot key function.
4. Enhance compatibility with certain Power Supply.
5. Fix the issue about unable to disable the "OnChip SATA Raid Rom" item.
6. Calibrate CPU temperature.
7. Add "PWM Shutdown Temperature" Item.
8. Add "PWM Warning Temperature" Item.
9. BIOS compile date: 04/27/2004


[中文]

1. 更新 CPU Micro Code.
2. 當 "Onboard Network Controller" 關閉時，MAC Address 仍會出現在
   System Configuration 中。
3. 新增 AWDFLASH v8.32 支援 "ALT+F2" 熱鍵功能。
4. 增加對部分電源供應器的相容性。
5. 修正無法關閉 "OnChip SATA Raid Rom" 的問題。
6. 校正 CPU 溫度。
7. 新增 "PWM Shutdown Temperature" 選項。
8. 新增 "PWM Warning Temperature" 選項。
9. BIOS 日期: 04/27/2004


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "is7g20.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================