BIOS release 1.5 for IS7    v1.0/v1.1
                                      IS7-E  v1.0/v1.1
                                      IS7-G  V1.0
                                    

Release information:

[ENGLISH]

1. Fixed the problem that no effect during POST if change "Delay IDE 
   Initial" in BIOS setup.
2. Revised the wording of IEEE1394 controller in PCI device listing.
3. Fixed the problem that DOS4GW.EXE causes system hang-up in DOS 
   environment.
4. Added function that automatically detects CPU operation speed after 
   discharging CMOS data.
5. Added SATA RAID 1 function for Intel ICH5R south bridge. The IAA 
   RAID driver should be updated to v3.5 or later to support RAID 1 in 
   Windows XP. 

   http://downloadfinder.intel.com/scripts-df/download.asp?url=/6363/
   eng/iaar35_enu.exe&ProductID=961

6. BIOS Compile date: 7/14/2003.

[中文]


1. 修正在BIOS設定中更改 "Delay IDE initial" 但是開機卻沒有延遲的問題。
2. 修改於 PCI Listing 中正確顯示 IEEE1394 控制器名稱。
3. 修正於 DOS 環境中執行 DOS4GW.EXE 程式當機的情形。
4. 修改系統於 CMOS 清除後自動以 CPU 預設頻率開機。
5. 新增支援 Intel ICH5R 的 RAID1 功能。IAA RAID 驅動程式必須更新到 v3.5 
   或更新版本才能在 Windows XP 中支援 RAID 1。

   http://downloadfinder.intel.com/scripts-df/download.asp?url=/6363/
   eng/iaar35_enu.exe&ProductID=961

6. BIOS 日期: 7/14/2003。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "is7g15.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================