BIOS release 1.8 for IS7/IS7-E/IS7-G  V1.0


Release information:

[ENGLISH]

1. Fixed the problem that the system cannot boot into Windows if 
   A. The OS is installed in the SATA hard disk when both the SATA
      and PATA hard disk are present. 
   B. The PATA hard disk is removed after the OS installation. 
2. Update Prescott CPU micro code.
3. Change the default year to 2004.
4. Update Intel OSB logo.
5. Enhance compatibility with certain Non-RAID Card.
6. Update INTEL RAID BIOS to version 3.5.0.3003.
7. BIOS compile date: 02/23/2004.



[中文]

1. 修正當 SATA 及 PATA 硬碟同時存在時，並將作業系統安裝在SATA硬碟上，之後
   再將 PATA 硬碟移除後無法開機之問題。
2. 新增 Prescott CPU 的 micro code。
3. 更改預設年份為2004。
4. 更新 Intel OSB logo。
5. 增加對部分非 RAID 卡的相容性。
6. 更新 INTEL RAID BIOS 版本為 3.5.0.3003。
7. BIOS 日期： 02/23/2004。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "is7g18.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================