BIOS release 1.1 for IS-10  V1.0


Release information:

[ENGLISH]

0. Please use flash utility AWDFLASH v8.24F to update IS-10 / IS-11 / 
   IS-12 BIOS.
1. Fixed the system hang-up problem that choose "Save and Exit Setup" in 
   BIOS Setup Menu by USB keyboard.
2. Revised the chipset wording to "i865G" in BIOS information.
3. Changed the option wordings of "Boot Device" from "ZIP100" to "ZIP100/
   250" and from "USB-ZIP" to "USB-ZIP/LS120".
4. Changed the display location of wordings below the Intel On-Screen 
   Branding LOGO.
5. Automatically removed the "Onboard 1394 controller" item inside BIOS 
   setup page for IS-10 and IS-11. (Only IS-12 features onboard 1394 
   controller)
6. Fixed "Unknown Flash Type" message during updating ESCD for ST Flash ROM 
   "M50FW040 K1 SBS4R032D".
7. Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" 
   in system configuration table.
8. BIOS Compile date: 8/26/2003.


[中文]

0. 請使用更新程式AWDFLASH v8.24F 更新 IS-10/IS-11/IS-12 BIOS。
1. 修正使用USB Keyboard 在BIOS Setup Menu 中選擇 Save and Exit Setup後
   系統當機。
2. 修改 BIOS information 中的 chipset name為 "i865G"。
3. 變更 "Boot Device" 中的選單字串為 "ZIP100/250" 及 "USB-ZIP/LS120"。
4. 將Intel OSB 畫面中的文字提示移到畫面下方中央。
5. 自動移除 IS-10 / IS-11 的 "Onboard 1394 controller" item。 (只有 IS-12 
   有內建1394功能)
6. 修正使用 ST "M50FW040 K1 SBS4R032D SIGAPORE" Flash ROM 在 Update ESCD 
   時出現 "Unknown Flash Type"。
7. 修改 System configurations 中字串 "DDR at DIMM(s)" 更改為 "DDR at DIMM"。
8. BIOS 日期:  8/26/2003。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "is1211.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================