BIOS release 1.7 for IG-80, IG-81 V1.0

Release information:

[ENGLISH]

1. EIST now will work as it should be after resume from S3.
2. Fan speed over 10000RPM will show correctly.
3. Fixed minor wording issue when CPU with 2M L2 cache is installed.
4. Add new items in hardware monitor section regarding FanEQ.
5. Added EIST control item.
6. Add "C1E Function" control item.
7. Change the default setting of "Execute Disable Bit" to "Disable".
8. BIOS compiled date: 04/11/2005






[中文]

1. 修正當從 S3 恢復時, EIST 功能會不正常的問題.
2. 可以正常顯示超過一萬轉的風扇轉速.
3. 修正當使用 2M L2 CPU 顯示字串的問題.
4. 新增 FAN EQ 相關選項.
5. 新增選項 EIST .
6. 新增選項 "C1E Function".
7. 將 "Execute Disable Bit" 預設值改為 "Disable". 
8. BIOS compiled date: 04/11/2005







*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "ig8017.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================