BIOS release 1.5 for IG-80,81,82 V1.0

Release information:

[ENGLISH]

1. Update CPU micro code.
2. Enhanced PCIE VGA performance.
3. Added CPU FANEQ Control item.
4. Fixed CPU Warning Temperature abnormal.
5. Fixed CPU Shutdown Temperature abnormal.
6. Fixed an issue that UUID been clear if NETWORK Controller disabled.
7. Fixed BOOT Sequence abnormal.
8. Fixed FAN abnormal after resume from S1/S3/S4.
9. Fixed FAN Fail Alarm function failure.
10. Fixed BOOT Form LAN abnormal issue if have no LAN connected.
11. Remove IRQ14 & IRQ15 item.
12. BIOS compile date: 01/26/2005


[中文]

1. 更新 CPU micro code.
2. 增強 PCIE VGA 效能.
3. 新增 CPU FANEQ Control 選項.
4. 修正 CPU Warning Temperature 不正常動作.
5. 修正 CPU Shutdown Temperature不正常動作.
6. 修正當 NETWORK Controller 關閉時 UUID會被清除的問題.
7. 修正 BOOT Sequence不正常動作.
8. 修正自 S1/S3/S4 回復之後風扇的不正常動作.
9. 修正 FAN Fail Alarm 失效.
10. 修正當沒有接網路接頭時 BOOT Form LAN 功能異常.
11. 移除 IRQ14 及 IRQ15 選項.
12. BIOS 日期: 01/26/2005


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "IG8015.EXE" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================