BIOS release 1.1 for IC7-Max3  V1.0


Release information:

[ENGLISH]

1. Updated CPU micro code (0F29H/14H).
2. Added new function to show warning message if memory voltage is or 
   higher than 3.0V.
3. Added hot key wording to enter BIOS setup when full screen logo enabled.
4. Changed the option wording from "OnChip SATA" to "OnChip SATA RAID" for
   "Bootable Add-in Device".
5. Changed the default setting of "FAN Fail Alarm Selectable" from
   "Disabled" to "OTES FAN".
6. Added new complex selections in "FAN Fail Alarm Selectable" and
   "Shutdown When FAN Fail".
7. BIOS Compile date: 8/5/2003.


[中文]

1. 更新 CPU micro code(0F29H/14H) 。
2. 新增記憶體電壓高於 3.0V 時顯示警告訊息的功能。
3. 新增熱鍵功能以全螢幕 logo 開啟進入 BIOS 設定。
4. 變更 "Bootable Add-in Device" 功能字樣從 "OnChip SATA" 改為 "OnChip 
   SATA RAID"。
5. 變更 "FAN Fail Alarm Selectable" 預設值從 "Disabled" 改為 "OTES FAN"。
6. 新增綜合選項在 "FAN Fail Alarm Selectable" 和 "Shutdown When FAN Fail"。
7. BIOS 日期: 8/05/2003。

*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "ic7p11.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================