BIOS release 1.1 for IC7/IC7-G v1.0
                                    

Release information:

[ENGLISH]

1. Added new option "SATA RAID ROM" to setup the BIOS of onboard and 
   on-chip SATA.
2. Revised setup menu for on-chip Serial ATA.
3. Fixed IOMEGA USB-ZIP 250 boot issue.
4. Added SVID/SDID for IC7 and IC7-G respectively.
5. Added "Intel on-screen branding" and could be enabled/disabled.
6. Added new options "Read Delay (Trd)" and "Turbo Mode" for system 
   performance.
7. Fixed on-chip SATA boot issue while another bootable hard drives 
   exist and attached to IDE-1 or IDE-2.
8. Updated memory reference code and ICH5 BIOS spec to v1.2.
9. Updated ICH5 SATA RAID BIOS to v3.0.0.2344.
10. Updated CPU micro code (CPU: 0F29H, ID=11H).
11. Added new options "Refresh Cycle Time", "Read Delay Adjust (tRD Adj)", 
    "Command Per Clock (CPC)", and "Performance Mode".
12. Added new option "IDE Bus Master".
13. Added CPU multiplier 8X for engineering sample CPU and maximum CPU 
    frequency 412 MHz.
14. Fixed DRAM timing settings while manually set them.
15. BIOS Compile Date: 4/30/2003.


[中文]

1. 新增 SATA RAID ROM 選項以控制 onboard 以及 on-chip SATA 之 BIOS。
2. 變更 on-chip Serial ATA 設定選單。
3. 修正 IOMEGA USB-ZIP 250 無法開機的問題。
4. 自動判別 IC7 或 IC7-G 主機板並填入個別的 SVID/SDID。
5. 新增 Intel on-screen branding 並且可以透過選項控制。
6. 新增兩個選項 "Read Delay (Trd)" 和 "Turbo Mode" 以提升系統效能。
7. 修正當 IDE-1 或 IDE-2 上有可開機硬碟時 on-chip SATA 無法開機成功的問題。
8. 更新 memory reference code 和 ICH5 BIOS spec 至 v1.2 版本。
9. 更新 ICH5 SATA RAID BIOS 至 v3.0.0.2344 版本。
10. 更新 CPU micro code (CPU: 0F29H, ID=11H)。
11. 新增四個選項 "Refresh Cycle Time", "Read Delay Adjust (tRD Adj)",
    "Command Per Clock (CPC)" 和 "Performance Mode"。
12. 新增選項 "IDE Bus Master"。
13. 針對工程版 P4 CPU 提供 8X 倍頻，同時將 SoftMenu 內 CPU 頻率上限提高至
    412 MHz。
14. 修正手動填入 DRAM timing 值不正確的問題。
15. BIOS Compile Date: 4/30/2003。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "ic711.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================