BIOS release 1.2 for AN8, Fatal1ty AN8 V1.0

Release information:

[ENGLISH]

1. Update RAID ROM to v4.81.
2. The CPU Multiplier function now works as intended.
3. Fix the issue that BIOS may hang at ABIT EQ voltage monitoring section if DDR voltage is set to 2.80V.
4. BIOS compiled date: 02/17/2005




[中文]

1. 更新RAID ROM 至 v4.81.
2. 修正 CPU 倍頻調整功能.
3. 修正 “DDR SDRAM Voltage” 調至 “2.8v” 時, 畫面切換至 “Voltage Monitor” 後, 會產生當機的問題.
4. BIOS compiled date: 02/17/2005




*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "an812.EXE" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================