BIOS release 1.5 for BH7 V1.0/1.1/1.11 BH7-E V1.0 Release information: [ENGLISH] 1. Revise CPU Temperature in "PC Health" page. 2. Fixes the problem if set up "Land Boot Rom" enabled, it would hang while resumed from S4 mode. 3. Adds the item help of "Smart Fan Speed Control". 4. The Hardware Monitoring tool needs to be updated to "HWM_BH7V15.EXE" together with BIOS update. 5. BIOS Compile Date: 6/17/2003. [中文] 1. 將 BIOS Setup 的 PC Health 中將 "CPU Temperature" 降低6度。 2. 修正當 "Lan Boot ROM" 為Enable時,從S4 Resume 會當機之問題。 3. 新增'Smart FAN Speed Control' Item Help。 4. 硬體監測程式請一併更新至 "HWM_BH7V15.EXE"。 5. BIOS Compile Date: 6/17/2003。 ********************************* NOTE ********************************* 1. How to upgrade BIOS: a. Boot into MS-DOS or "Safe mode and command prompt" if you are using Windows95/98 b. Run "bh715.exe" to extract all files. c. Run "runme.bat" *** Please notice that we suggest you flashing the bios with switches "/py /sn /cd /cp /cc /cks /R" or by "runme.bat". d. For more detail, please visit: http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese) http://fae.abit.com.tw/eng/download/bioshelp.htm (English) 2.After BIOS updated, pull off the power cord and then clear the CMOS data via jumper before restarting system please. ============================================================================