Official BIOS release D5 for BG7E v1.0

Release information:

[ENGLISH]

1. The APIC Mode option Enabled and highlighted in BIOS while used 
   Hyper-Threading CPU.(It would turn out to be normally while Hyper-
   Threading Technology set up to Disabled.)
2. "CPU Hyper-Threading" option in "Advanced BIOS Features" revised to 
   "Hyper-Threading Technology" to fit in with the requirement of Intel. 
3. Show "Hyper-Threading" wording on POST screen when Hyper-Threading 
   CPU installed.
4. Show MAC Address of on board LAN Card in System Configuration section.
5. Change the definition of UUID in DMI data- move the MAC address from 
   top to bottom of the string.
6. Revise DMI Pool data. 
7. BIOS Compile Date: 12/16/2002


[TRADITIONAL CHINESE]

1. 使用Hyper-Threading CPU, BIOS 內之APIC Mode 選項能設定 Enabled 且反白。
2. 依照Intel 之要求，將 "Advanced BIOS Features" 中 "CPU Hyper-Threading" 
   項目更名為 "Hyper-Threading Technology"。
3. 使用 Hyper-Threading CPU時, 開機時顯示Hyper-Threading 字樣。
4. 於 System Configuration 欄位中顯示所使用的 LAN Card 之MAC Address。
5. 於 DMI 資料區中將 MAC Address 填入 UUID 位置中，以符合WHQL 的測試要求。
6. 修正 DMI Pool DATA 的問題。
7. 發行日期: 12/16/2002。



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "bg7ed5.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================