Official BIOS release CW for BE7/BE7-RAID

Release information:

[ENGLISH]

1. Fix the compatibility issue that ATI Radeon 9700 Pro failed to boot up 
   with certain power supply unit - TC-350P. With this power supply, 9700 
   Pro will failed to boot up and need to push reset button once to show 
   the screen.
2. Change the definition of UUID in DMI data- move the MAC address from top 
   to bottom of the string.
3. Show "Hyper-Threading" wording on POST screen when Hyper-Threading CPU 
   installed.
4. HPT 372 BIOS Version 2.32.The RAID function is only for BE7-RAID.The BIOS 
   is suitable for non-RAID boards and it would automatic disable HPT BIOS 
   while recognized non-RAID boards.
5. BIOS Compile Date: 11/28/2002.


[TRADITIONAL CHINESE]

1. 修正使用 ATI RADEON 9700 Pro 顯示卡的相容性問題。在使用某些特定的電源供
   應器-如 TC-350P。使用這個電源供應器，9700 Pro 顯示卡在開機時，必須再按一
   次 reset 才能正確顯示。
2. 於DMI 資料區中將 MAC Address 填入 UUID 位置中, 以符合WHQL的測試要求。
3. 修正 Hyper-Threading CPU並使用 Windows flash utility 時失效的問題。
4. HPT 372 BIOS 版本 2.32。適用於 BE7-RAID。本 BIOS 同時適用於非 RAID之主
   機板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會自動關閉 HPT BIOS。
5. BIOS 日期: 11/28/2002。



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "be7cw.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.