Official BIOS release CG for BE7/BE7-RAID v1.0
                                                  

Release information:

[ENGLISH]

1.MAC Address fills into UUID section in DMI data in order to pass WHQL.
2.Show MAC Address of on board LAN Card in System Configuration section.
3.Show "Award BIOS" on BIOS Setup Utility.(Used be "Work station BIOS")
4.Fix Windows flash utility invalidity when using Hyper-Threading CPU.
5.Fix issue where if the "Shutdown When CPU FAN Fail" option fails after 
  about 16 minutes idling under Windows 2000/XP.
6.HPT 372 BIOS Version 2.32.The RAID function is only for BE7-RAID. 
  The BIOS is suitable for non-RAID boards and it would automatic disable 
  HPT BIOS while recognized non-RAID boards.
7.BIOS compile Date: 11/06/2002.



[TRADITIONAL CHINESE]

1. 於 DMI 資料區中將 MAC Address 填入 UUID 位置中，以符合 WHQL的測試要求。
2. 於 System Configuration 欄位中顯示所使用的網路晶片之MAC Address。
3. 修正 BIOS Setup Utility 字樣為 "Award BIOS"(原為"Workstation BIOS")。
4. 修正使用 Hyper-Threading CPU 時使用 Windows flash utility 時失效的問題。
5. 修正於 BIOS 中將 "Shutdown When CPU FAN Fail" 功能開啟，且於 Windows 
   2000/XP 系統下閒置16分鐘以上之後，則該功能失效的問題。
6. HPT 372 BIOS 版本 2.32。適用於 BE7-RAID。本 BIOS 同時適用於非 RAID之
   主機板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會自動關閉 HPT BIOS。
7. BIOS 日期: 11/06/2002。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "be7cg.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.