BIOS release DP for BE7/BE7-RAID v1.0
                                    

Release information:

[ENGLISH]

1. Systems can not detects the fan speed and automatically shut down 
   while using low rotation speed fan.
2. Adjust the SP_LED as following to conform to the requirement:

     S0....Always on
     S1... Blink (faster frequency)
     S3....Blink (slower frequency)If the LED could not support 
           different blinking frequency, it would behave like S1 state.
     S4....Always off
     S5....Always off

3. Fix the multiplier of unlocked CPU shows incorrectly while resumed 
   from STR.
4. Update CPU micro code。（0F24/18, 0F27/33, 0F29/0E）
5. HPT372 BIOS version 2.32.
6  BIOS compile date 3/27/2003.


[中文]

1. 修正使用低轉速風扇（如 INTEL 原廠風扇）時，常會因偵測不到轉速而自動關機
   的情形。
2. 修正 SP_LED 的動作如下，以符合規定。

     S0....Always 亮
     S1....閃爍(頻率較快)
     S3....閃爍(頻率較慢)如果LED不能支援不同的閃爍頻率,會如同S1。
     S4....Always 不亮
     S5....Always 不亮

3. 修正使用未鎖倍頻的 CPU 時，當從 STR 回復後其倍頻不正確的問題。
4. 更新 CPU micro code。（0F24/18, 0F27/33, 0F29/0E）
5. HPT372 BIOS 版本 v2.32。
6. BIOS 日期: 3/27/2003。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "be7dp.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================