Official BIOS release AW for BD7II/BD7II-RAID

Release information:

[ENGLISH]

1. Upgrade the BIOS code for ICH4 to V1.5.
2. Fill in new CPU micro code (0F27).
3. Support PMC Pm49FL004T 4Mb Flash ROM.
4. Provide multiplier higher than 24x in SoftMenu.
5. Fix some CL=3 DDR400 memory modules fail to boot issue.(Both DDR333 
   and DDR400 modules can only work at DDR 266 owing to 845E chipset 
   specification.) 
6. Fix "CPU Shutdown Temperature" function failed under Win2K.
7. HPT 372 BIOS Version 2.32. The RAID function is for BD7II-RAID only. 
   This BIOS version is also for non RAID boards and HPT BIOS will be 
   automatically disabled while RAID controller chip not detected.
8. BIOS compile Date: 8/26/2002.


[TRADITIONAL CHINESE]

1. 更新 ICH4 micro code 為1.5版。
2. 填入新的 CPU micro code (0F27)。
3. 支援 PMC Pm49F004T 4Mb Flash ROM。
4. 於 SoftMenu中新增支援 24 倍頻以上。
5. 修正某些 CL=3 的 DDR400 記憶體模組相容性問題。(請注意，由於 845E 晶片組
   規格限制，DDR333 及 DDR400 模組僅能以 266 的速度工作)
6. 修正 "CPU Shutdown Temperature" 功能於Win2K 下失效的問題。
7. HPT 372 BIOS 版本 2.32。適用於 BD7II-RAID。本 BIOS 同時適用於非 RAID之
   主機板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會自動 disable 
   HPT BIOS。
8. BIOS 日期: 8/26/2002。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "bd72aw.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.