Official BIOS release AJ for BD7II/BD7II-RAID Release information: [ENGLISH] 1. Fix multimedia device lost issue with 533MHz FSB CPUs while load Fail-Safe / Optimized Default in BIOS. 2. Add SVID and SSID for ICH4 USB 2.0 controller.(SVID:147B,SSID:7402) 3. Load proper setting automatically for Willamette CPU when Load Fail-safe/Optimized Default in BIOS. 4. HPT 37x BIOS version 2.31. The RAID function is for BD7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected. 5. BIOS compile date: 7/23/2002. [CHINESE] 1. 解決使用 533MHz 外頻 CPU,並在 BIOS 內 Load Fail-safe/Optimized Default ,造成multimedia device遺失的情形。 2. 增加 SVID 和 SSID 在 ICH4 USB 2.0 上 (SVID:147B,SSID:7402)。 3. 使用 Willamette CPU,在設定Load Fail-safe/Optimized Default後,載入適當 的設定值。 4. HPT 37x BIOS version: 2.31。適用於 BD7II-RAID。本 BIOS 同時適用於非 RAID 之主機板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會自動 disable HPT BIOS。 5. BIOS 日期: 8/23/2002。 ********************************* NOTE ********************************* 1. How to upgrade BIOS: a. Boot into MS-DOS or "Safe mode and command prompt" if you are using Windows95/98 b. Run "bd72aj.exe" to extract all files. c. Run "runme.bat" *** Please notice that we suggest you flashing the bios with switches "/py /sn /cd /cp /cc /cks /R" or by "runme.bat". d. For more detail, please visit: http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese) http://fae.abit.com.tw/eng/download/bioshelp.htm (English) 2.After BIOS updated, pull off the power cord and then clear the CMOS data via jumper before restarting system please. ============================================================================.