Official BIOS release 93 for BD7II/BD7II-RAID V1.0

Release information:

[ENGLISH]

1. Add an option "Enhance DRAM Performance" in Advanced Chipset Features.
2. HPT 37x BIOS Version 2.31 The RAID function is for BD7II-RAID only. 
   This BIOS version is also for non RAID boards and HPT BIOS will be 
   automatically disabled while RAID controller chip not detected.
3. BIOS compile date: 5/3/2002.


                 !!! Attention for upgrading BIOS!!! 

 * When you upgrade bios to new bios included HPT 2.31 bios, we highly 
   recommend you backup your system and data to an independent storage 
   device first. New HPT 2.31 bios may corrupt original RAID configuration 
   created on old bios occasionally. That means you may need to rebuild 
   RAID configuration. If it happens, all the data on RAID-0 will be gone! 

 * For RAID-1 user, please press "CTRL+H" to enter hpt37x setup.

 * Please upgrade HPT 2.31 driver before upgrade bios.


[TRADITIONAL CHINESE]

1. ¦bAdvanced Chipset Features¤º¼W¥[Enhance DRAM Performance¿ï¶µ.
2. HPT 37x BIOS ª©¥» 2.31¡C ¾A¥Î©ó BD7II-RAID¡C¥» BIOS ¦P®É¾A¥Î©ó
   «D RAID ¤§¥D¾÷ªO¤W¡C·í BIOS °»´ú¨ì±z¨Ï¥Îªº¥D¾÷ªO¤£§t RAID ®É
   ±N·|¦Û°Ê disable HPT BIOS¡C
3. BIOS ¤é´Á: 5/3/2002¡C

                     !! ĵ§i !! ¤É¯Å BIOS ª`·N¨Æ¶µ

 * ·í±z­n¥Ñ BIOS ¤É¯Å¦Ü§t¦³ HPT 2.31 ª©¥» BIOS ®É¡A§Ú­Ì±j¯P«Øij±z¥ý³Æ¥÷
   ±zªº¨t²Î»P¸ê®Æ¨ì¤@¿W¥ßªºÀx¦s´CÅé¤W¡C·sª© HPT 2.31 bios ¥i¯à·|ÀH¾÷·l·´
   ­ì©lªº RAID ³]©w¡C³o·N«ü±z¥²»Ý¦A­««Ø RAID ³]©w¡C·í³o±¡ªpµo¥Í¡A©Ò¦³¦b 
   RAID-0 ¤Wªº¸ê®Æ±N·|®ø¥¢¡C

 * RAID-1 ¨Ï¥ÎªÌ¡A½Ð«ö¤U CTRL+H¶i¤J HPT BIOS ³]©wµe­±¨Ã°õ¦æ Duplicate Mirror 
   Disk§Y¥i«ì´_¨t²Î¡C

 * ±z¦b§ó·s BIOS ¤§«e¡A½Ð¥ý§ó·s±zµwºÐùتº HPT37X ÅX°Êµ{¦¡¡C



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "bd7293.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power core and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.