Official BIOS release BJ for BD7/BD7-RAID v1.0

Release information:

[ENGLISH]

1. Willamette CPU will be automatically detected its FSB while Load 
   Fail-Safe/Optimized Default in Bios Setup of SoftMenu.
2. Fill in new CPU micro code (0F27).
3. Provide multiplier higher than 24x in SoftMenu.
4. Fix some CL=3 DDR400 memory modules fail to boot issue.(Both DDR333 
   and DDR400 modules can only work at DDR 266 owing to 845/D/E chipset 
   specification.)
5. Fix "CPU Shutdown Temperature" function failed under Win2K.
6. HPT 372 BIOS Version 2.32. The RAID function is for BD7-RAID only. 
   This BIOS version is also for non RAID boards and HPT BIOS will be 
   automatically disabled while RAID controller chip not detected.
7. BIOS compile Date: 9/11/2002.


[TRADITIONAL CHINESE]

1. 新增使用 Willamette CPU時, 於BIOS Setup中, Load Fail-Safe/Optimized 
   Default 後, SoftMenu 選單會自動選擇所符合該CPU 的設定表。
2. 填入新的 CPU micro code (0F27)。
3. 於 SoftMenu中新增支援 24 倍頻以上。
4. 修正某些 CL=3 的 DDR400 記憶體模組相容性問題。(請注意，由於 845/D/E 晶片
   組規格限制，DDR333 及 DDR400 模組僅能以 266 的速度工作)
5. 修正 "CPU Shutdown Temperature" 功能於Win2K 下失效的問題。
6. HPT 372 BIOS 版本 2.32。適用於 BD7-RAID。本 BIOS 同時適用於非 RAID之主機
   板上。當 BIOS 偵測到您使用的主機板不含 RAID 時將會自動 disable HPT BIOS。
7. BIOS 日期: 9/11/2002。


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using 
    Windows95/98
 b. Run "bd7bj.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches 

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".  

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data 
  via jumper before restarting system please.


============================================================================.