BIOS release 1.7 for AV8 V1.0/1.1 Release information: [ENGLISH] 1. Update uGuru Utility to uav8_019.bin. 2. Update SATA ROM. 3. Added "Delay Transactions" item. 4. Added "PCI Latency Timer function" item. 5. Removed an error message if modify year and SAVE&EXIT. 6. Fixed an issue that while press TAB key skip OSB logo the Memory Information & memory Clock would missing. 7. Changed "USB 2.0 Controller" defaulted to "Enabled", and synchronize with "OnChip USB Controller" setting. 8. Synchronize "DDR Voltage" & "SB Voltage" in PC Health item if been modified. 9. Changed "Resume by OnChip USB" default to "Enabled". 10. Changed "ACPI Suspend Type" default to "S3". 11. Added DMI information. 12. Calibrate CPU temperature. 13. Added "Dual Channel Enabled 128bit"when Dual Channel mode. 14. BIOS compile date: 11/12/2004 [中文] 1. 更新 uGuru Utility至 uav8_019.bin. 2. 更新 SATA ROM. 3. 新增 "Delay Transactions" 選項. 4. 新增 "PCI Latency Timer function" 選項. 5. 修正當修改年份後儲存離開會出現錯誤的訊息. 6. 修正當按下 TAB 鍵後 Memory Information 及 memory Clock 字串會消失的問題. 7. 更改 "USB 2.0 Controller" 預設為 "Enabled", 且與 "OnChip USB Controller" 設定同步. 8 將 "DDR Voltage" 及 "SB Voltage" 設定與 PC Health 選項同步. 9. 更改 "Resume by OnChip USB" 預設至 "Enabled". 10. 更改 "ACPI Suspend Type" 預設至 "S3". 11. 新增 DMI information. 12. 校正 CPU 溫度. 13. 新增 "Dual Channel Enabled 128bit" 字串. 14. BIOS 日期: 11/12/2004 ********************************* NOTE ********************************* 1. How to upgrade BIOS: a. Boot into MS-DOS or "Safe mode and command prompt" if you are using Windows95/98 b. Run "av817.exe" to extract all files. c. Run "runme.bat" *** Please notice that we suggest you flashing the bios with switches "/py /sn /cd /cp /cc /cks /R" or by "runme.bat". d. For more detail, please visit: http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese) http://fae.abit.com.tw/eng/download/bioshelp.htm (English) 2.After BIOS updated, pull off the power cord and then clear the CMOS data via jumper before restarting system please. ============================================================================