BIOS release 1.3 for AV8 V1.0/1.1

Release information:

[ENGLISH]

1. Updated uGuru Utility to uAV8_014.BIN.
2. Fixed an issue where the "LDT & PCI Bus Control" item’s "16bit"
   function would fail.
3. Added "Fixed (74Mhz)" in AGP Ratio item.
4. Modified "LDT Bus Frequency" item from FSBx5, x4, x3, x2 to x1, and
   removed "Auto" selection.
5. Added FSB up to 410 MHz & enhanced stability over 300 MHz. 
6. Removed HyperTransport Voltage 1.4V.
7. BIOS compile date: 08/11/2004


[中文]

1. 更新 uGuru Utility 至 uAV8_014.BIN.
2. 修正 "LDT & PCI Bus Control" 選項之 "16bit" 功能失效.
3. 新增 "Fixed (74Mhz)" 於 AGP Ratio 選項.
4. 修改選項 "LDT Bus Frequency" 由 FSBx5, x4, x3, x2 至 x1, 並移除 "Auto"
   選項.
5. 新增 FSB 至 410 MHz 及超過 300 MHz 之穩定性.
6. 移除 HyperTransport Voltage 1.4V.
7. BIOS日期: 08/11/2004


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "av813.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================