BIOS release 1.1 for AT8 V1.0

Release information:

[ENGLISH]

1.	Support DRAM ECC Function..
2.	Modify system state error after AC power lose
3.	Modify some USB boot and sting fail
4.	Modify CAS Latency timing issue
5.	Modify auto boot up when inserted USB device.
6.	BIOS compiled date: 3/10/2006





[中文]
1.	增加支援 DRAM ECC Function..
2.	修正System state error after AC power lose
3.	修正 some USB boot and sting fail
4.	修正CAS Latency調整失效的問題
5.	修正當插入USB裝置時，系統會自動開機問題.
6.	BIOS compiled date: 3/10/2006





*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "at811.zip" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================