BIOS release 1.6 for AN8, AN8-V, AN8 Ultra, AN8 SLI, Fatal1ty AN8, Fatal1ty AN8 SLI

Release information:

[ENGLISH]

1.	Change default setting of Cool n' Quiet to "Enable"
2.	Change Full screen logo.
3.	Cool n' Quiet now works as intended.
4.	Fixed the issue that certain VGA card does not work with DVI output.
5.	Fixed the issue that some 3D application may not run stable in SLi mode.
6.	Change some item in DRAM voltage section.
7.	Add AMD MCT2 version 1.3 support.
8.	BIOS compiled date: 07/12/200


[中文]

1.	修改 Cool n' Quiet 設定值為 "Enable"
2.	修改 Full screen logo.
3.	修正Cool n' Quiet 動作錯誤問題.
4.	修正顯示卡DVI 輸出問題
5.	增加 顯示卡SLi mode相容性.
6.	修正 DRAM voltage 選項
7.	更新AMD MCT2 
8.	BIOS compiled date: 07/12/200






*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "an816.EXE" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================