BIOS release 1.5 for AN7 V1.0


Release information:

[ENGLISH]

1. Please use flash utility AWDFLASH v8.24F to update AN7 BIOS.
2. Add auto shutdown function while CCMOS jumper is placed at PIN 2-3. 
   The correct setting is placed at PIN 1-2; the CPU core voltage will be 
   abnormally high if placed at PIN 2-3, system will shut down 
   automatically to protect CPU from damage.
3. Fixed that USB-ZIP will be detected as a harddisk.
4. Update SI3112 SATA BIOS to v4.2.47.
5. Revised the characters in "Wakeup by Alarm".
6. Add an option to enhanced USB 2.0 device compatibility. User may set 
   the option to "enabled" in "Integrated Peripherals / OnChip PCI Device / 
   USB 2.0 Device Compatible".
7. Fixed the issue that can't select SCSI boot ID with some SCSI card.
8. Fixed the issue that SATA HDD boot up fail without PS/2 Mouse.
9. Fixed the issue that the system will show 119 degrees at certain
   circumstances.
10. BIOS compile date: 03/04/2004.



[中文]

1. 請使用更新程式 AWDFLASH v8.24F 更新 AI7 BIOS。
2. 增加 CCMOS 跳線在 PIN2-3 時自動關機的功能。正確的CCMOS位置在PIN 1-2;
   若跳線在 PIN2-3 的位置將導致 CPU 核心電壓異常升高，系統將自動關機避免
   CPU受損。
3. 修正將 USB-ZIP 誤判為硬碟之問題。
4. 更新 SI3112 SATA BIOS 至 v4.2.47。
5. 修正 "Wakeup by Alarm" 內的字串。
6. 新增選項以增強 USB 2.0 裝置的相容性。如果遇到 USB 裝置的相容性問題，
   可以將選項設定成 "enabled"。這個選項位於 "Integrated Peripherals / 
   OnChip PCI Device / USB 2.0 Device Compatible"。
7. 修正對部分 SCSI 卡無法選擇 SCSI boot ID 的問題。
8. 修正若無 PS/2 滑鼠無法從 SATA 硬碟開機的問題。
9. 修正在部分情況下系統溫度會出現 119 度的問題。
10. BIOS 日期: 03/04/2004。



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "an715.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.