BIOS release 1.6 for AI7 V1.0


Release information:

[ENGLISH]

1. Please use flash utility AWDFLASH v8.24F to update AI7 BIOS.
2. Fixed the problem that the system cannot boot into Windows if
   A. The OS is installed in the SATA hard disk when both the SATA and
      PATA hard disk are present.
   B. The PATA hard disk is removed after the OS installation.
3. Add "CPU FAN Failed Warning" item.
4. Update Prescott CPU micro code.
5. Update Intel OSB logo.
6. Change the default year to 2004.
7. Add "Full Screen LOGO Show" and replace "Intel OnScreen Branding" item.
8. Update INTEL RAID BIOS to version 3.5.0.3003.
9. BIOS compile date: 02/25/2004.


[中文]


1. 請使用更新程式 AWDFLASH v8.24F 更新 AI7 BIOS。
2. 修正當 SATA 及 PATA 硬碟同時存在時，並將作業系統安裝在 SATA 硬碟上，
   之後再將 PATA 硬碟移除後無法開機之問題。
3. 新增 "CPU FAN Failed Warning" 選項。
4. 新增 Prescott CPU 的micro code。
5. 更新 Intel OSB logo。
6. 更改預設年份為 2004。
7. 新增 "Full Screen LOGO Show"，並取代 "Intel OnScreen Branding"選項。
8. 更新 INTEL RAID BIOS版本為 3.5.0.3003。
9. BIOS 日期: 02/25/2004。



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "ai716.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================