BIOS release 1.7 for AG8/AG8-V V1.0

Release information:

[ENGLISH]

1. Update CPU micro code.
2. Fixed an issue where after clear CMOS & into BIOS setting but not Load
   Optimized Default CPU clock show 0000MHz.
3. Show DRAM type when Full screen Logo disabled.
4. Adjust CPU FAN Speed Low Limit to 300RPM.
5. Remove abnormal DDR600 item.
6. Add adjustable MAX & MIN multiplier item for certain retail INTEL CPU.
7. Fixed an auto wake up issue if system resume from standby mode before.
8. BIOS compile date: 09/22/2004


[中文]

1. 更新 CPU micro code.
2. 修正當清除CMOS資料後設定 BIOS 而不讀取Load Optimized Default 會出現 CPU
   clock 為 0000MHz.
3. 當關閉開機畫面 Logo 時顯示 DRAM 種類.
4. 降低 CPU FAN Speed Low Limit 至300RPM.
5. 移除不正常的 DDR600 選項.
6. 新增對於部分市售INTEL CPU 可調整最大及最小倍頻選項
7. 修正從待命模式回復後關機會自動開機的問題..
8. BIOS 日期: 09/22/2004


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "AG817.EXE" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================