BIOS release 1.5 for AA8 V1.0

Release information:

[ENGLISH]

1. Update CPU micro code.
2. If system memory not installed yet, make a beep alarm.
3. Add "CPU feature" item in "Advanced BIOS Features".
4. If FSB=533Mhz, DDR ratio=2:3.
5. Fix POST fail issue if continuous press TAB key.
6. Enable "SATA MODE" item if "Onchip Serial ATA model" in "AUTO".
7. Fix a issue where "PCI-E Compliancy Mode" in "V1.0" make COMS CHECK
   COMS error.
8. BIOS compile date: 08/20/2004


[中文]

1. 更新CPU micro code.
2. 若系統記憶體未安裝妥當將發出警告聲.
3. 新增 "CPU feature" 選項於 "Advanced BIOS Features" 中.
4. 當 FSB=533Mhz 時 DDR ratio為 2:3.
5. 修正當連續按下 TAB 鍵將導致開機失敗.
6. 當 "Onchip Serial ATA model" 選項為 "AUTO" 時不將 "SATA Mode" 反白.
7. 修正當 "PCI-E Compliancy Mode" 為 "V1.0" 會導致 COMS CHECK SUM error
   出現.
8. BIOS日期: 08/17/2004


*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "AA815.EXE" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.


============================================================================