IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

NETFINITY 5500 & 5500-M10: NETWARE 4.11 SMP INSTALL PROBLEMS

    Record number:       H164870
    Device:              D/T8660
    Model:               M
    Hit count:           UHC00000
    Success count:       USC0000
    Publication code:    PC50
    Tip key:
    Date created:        O98/10/07
    Date last altered:   A98/10/07
    Owning B.U.:         USA


Abstract: NETFINITY 5500 & 5500-M10: NETWARE 4.11 SMP INSTALL PROBLEMS

SYMPTOM:

During the Novell NetWare 4.11 SMP installation, the problem will appear as either an inability to see the NetWare partitions, or a red screen stating that the drives are inaccessible during NetWare volume creation.

PROBLEM ISOLATION AIDS:

•  The system is one of the following Netfinity servers:

    a Netfinity 5500, Type 8660, any Model.
    a Netfinity 5500 M10, Type 8661, any Model.

•  The system is installing Novell NetWare 4.11 SMP.
•  The system has one of the symptoms described.

FIX:

Ensure the disk controller on which NetWare is being installed does not share the IRQ with any other adapter. Install Support Pack 5B before loading SMP support. Support Pack 5B has a newer version of MPS14.PSM which fixes the problem.

DETAILS:

The problem is caused by an interrupt routing problem in the MPS14.PSM module that occurs when the following conditions are met:

1.  More than 1 disk controller on the same IRQ.
2.  Both disk controllers on the same PCI bus.
3.  NetWare 4.11 SMP support is loaded.
4.  IPSRAID.HAM driver is loaded for more than 1 adapter.

The problem does not occur with NetWare 3.x or NetWare 5.0 or after Support Pack 4 or later (IWSP4.EXE or IWSP5B.EXE) are applied to the NetWare 4.11 system.

TRADEMARKS:

Other company, product and service names may be the trademarks or service marks of others.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.