|
|
|
CHAPTER 2. Systems restricted to 1 Auto LANStreamer PCI adapter
Some systems can only support a single Auto LANStreamer PCI
adapter due to limited PCI-to-memory bandwidth.
Symptoms that might indicate a memory bandwidth restriction are:
A) Single adapter can attach to the network, but fails if two
adapters are active in the system
B) Adapters connect to the network, but then lose connection to
the network when the LAN traffic on both adapters increases,
or when other system I/O activity increases (disk, video,
etc.)
Current systems only supporting 1 Auto LANStreamer PCI adapter.
- IBM ValuePoint D/60 (model 6384)
The adapter should be installed in the lower slot.
(NOTE: System updates are being developed to allow multiple
Auto LANStreamer PCI adapters. Please check with your system
provider, or IBM for applicability and availability.)
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.