 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
ECA 056 - Artic multiport/a +8595
ECA 056 - Artic multiport/a + 8595
Artic multiport/2, 8595 w/intermittent errors
PURPOSE:
To determine if the Artic multiport/2 adapter should be replaced
as described in the detail of this ECA:.
PHYSICAL check:
Check for part number 09F1877 or 57F2712 on the gate array
(large silver component located above the bus connector) and
for the presence of components in positions U21 and U22.
Affected adapters will have one of the above part numbers and
components in positions U21 and U22.
DETAIL:
The Multiport/2 adapter may cause the following intermittent
errors when installed in an 8595:
- - 111 errors
- - system HANG conditions
- - memory failures while running diagnostics
These failures may be system and slot sensitive.
NOTEs:
Replace the Artic multiport/2 adapter P/N 09F1888 (512KB) or
P/N 09F1962 (1MB) as appropriate.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.