 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Unknown FLASH id 55aa
PROBLEM - Valuepoint 6381 SX and DX systems may display the following message when
attempting to install FLASH BIOS:
"unknown FLASH ID 55AA"
"check jumper 03"
Machines AFFECTED - Valuepoint 6381 SX and DX systems.
SOLUTION - Move the FLASH enable jumper from PINs 2 and 3 to PINs 1 and 2 (rear 2 PINs)
and continue with FLASH installation per the instructions in "readme.fil".
If the 2-pin jumper is missing, order jumper FRU P/N 93F0067 (2 position-4 pack).
Inspect the system board for the following jumper: SX models - J11 or DX models - J10
If this jumper location is present, this tip applies.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.