Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Inner Chassis Fan (8650)



Inner Chassis Fan

NOTE: The fan bracket assembly is not held together with screws. As you remove the assembly from the chassis, do not let the parts fall.
  1.  Press the release tabs on the side of fan bracket. Rotate the  assembly  outward from until the tabs on the opposite side of the bracket clear the  slots in the chassis.
  2.  Lift the fan out of the bracket, pulling up the cable around the grill.

 

  1.  Airflow direction arrows on side of fan, center label on fan facing back of chassis
  2.  Inner chassis fan
  3.  Protective grill
  4.  Hinge tabs on inner edge of bracket
  5.  Slot in bracket for routing power cable (and through grommeted hole,  not shown, beyond inner edge of bracket
  6.  Bracket release tab
  7.  Fan 2 header on system board

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.