Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Setup Program Default Settings Type 8641 (Models EZO, EZV, EZL, EZS, EZE)



Setup Program Default Settings Type 8641 (Models EZO, EZV, EZL, EZS, EZE)
Option    Default Value
  
Boot sequence    A: then C:
Cache State    Enabled
COM1 Port    3F8, IRQ 4
COM2 Port    2F8, IRQ 3
Diskette access    User
Diskette check    Disabled
Diskette controller    Enabled
Diskette Drive A    1.44MB, 3.5 in.
Diskette Drive B    Not installed
Hard disk boot sector    Normal
Large disk DOS compatibility    DOS
LPT Port    378, IRQ 7
LPT mode    Output only
Memory gap    Disabled
Memory (Extended)    15MB
Bank 0 Socket 1    8MB Kit
Bank 0 Socket 2    8MB Kit
Bank 1 Socket 3    
Bank 1 Socket 4    
Bank 2 Socket 5    
Bank 2 Socket 6    
Bank 3 Socket 7    
Bank 3 Socket 8    
Total Memory    16MB
Memory (System)    640MB
Password on boot    Disabled
Post errors    Enabled
Set supervisor password    Press Enter
Set user password    Press Enter
Setup prompt    Enabled
Supervisor Password is    Disabled
Swap diskettes    Normal
User password is    Disabled
Video BIOS    Shadowed
Video System    SVGA


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.