 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Starting the EISA Configuration Diskette
Starting the EISA Configuration Diskette
Using a backup copy of the EISA Configuration Diskette can
prevent damage to the original diskette (see 'Backing Up the EISA Configuration Diskette' ).
To start the EISA Configuration Diskette, do the following:
- Insert the EISA Configuration Diskette into the diskette drive.
- Power-on the computer, or if it is already on,
shut down the operating system and restart the computer.
- When the first screen appears, type CF and
press Enter.
Follow the instructions on the screen until the main menu,
Steps in configuring the computer, appears.
- Use the Up Arrow (
) or Down Arrow ( 
) key
to advance through the items on the screen.
Use the Tab key to select choices on the bottom of the screen.
Press the Esc key to return to a previous menu.
- Press Enter to make a selection.
- Follow the instructions on the screen to view or change (edit)
the configuration information.
NOTE:
Adapters installed in the server
appear automatically on the EISA Configuration screens
after you copy
the adapter’s configuration file (file with an
extension of .CFG ) to the
EISA Configuration Diskette.
If you want to manually add an
adapter that you have not yet installed in the server,
add it using
Step 2 from the menu.
To configure ISA adapters, follow the instructions on the screen.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.