 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
System Board Replacement (Type 8640)
System Board Replacement (Type 8640)
Type 8640 computers have one or two processors, and other
components installed on the system board. When replacing the system board,
remove all of the installed components from the old system board and
install them on the new system board. If the problem remains, check the
following:
- The primary processor is installed and seated correctly in socket U2
on the system board.
- If installed, the secondary processor is seated correctly in socket U3
on the system board.
- All other components removed from the old system board are installed
and seated correctly on the new system board.
NOTE:
If the processor(s) are not seated correctly, intermittent problems can
occur.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.