 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Type 8640 (Models OXO, OXT)
Type 8640 (Models OXO, OXT)
If a hardware configuration error is detected, a
configuration error message appears after the server completes
POST, but before the operating system starts. You can bypass the error
or start one of the configuration utility programs. Press F1 to
bypass the error and load the operating system. Press F2 to
start the Setup program. To start the EISA Configuration Diskette,
insert the diskette in the diskette drive and press F1.
The Setup program and the EISA Configuration program configure only the
system hardware. These programs do not consider the requirements of the
operating system or the application programs.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.