IBM 0275-011 - Color (EPP-port) Image Scanner

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

IBM 0275-011 - Color (EPP-port) Image Scanner

Color Image Scanner connected to EPP-port (M/T-0275 Model-011)

FRU P/N ----------------------------- Scanner FRU 10L7472 Power Adapter 10L7474 (universal) Scanner Cables 10L7476 ----------------------------- OPT P/N ----------------------------- EMEA 10L7481 Denmark 10L7489 Italy 10L7487 South Africa 10L7473 Swiss 10L7483 U.K. 10L7485 Sweden N.A.

Option includes

Scanner
Interface cable
Getting started card
Power Adapter
Power Cord
Installation CD
User's Guide (English, French, German, Italian, Spanish)

The IdeaScan Color Flatbed Scanner comes with the PhotoStudio Suite and Textbridge Classic 2.0 OCR software needed to scan images and convert pages to text. The PhotoStudio Suite includes:

PhotoStudio SE 2.0 (imaging editing application)
PhotoFantasy (fun application to merge images)
PhotoBase (image mgmt., photo-album-like tool)
PhotoPrinter (enhances image printing)

Prerequisites

IBM PC or IBM-compatible PC
80486 DX2 66 MHz processor (or better)
16 MB RAM memory
CD-ROM drive
100 MB free hard disk drive space
SVGA video support (64K color)
Parallel port (EPP capability)
Operating System Requirements
- MS Windows NT 4.0
- MS Windows 95
- MS Windows 98

This scanner is not compatible with the Cannon BJC-620 printer.

Highlights

600 dpi optical resolution
1200 dpi mechanical resolution
9600x9600 enhanced resolution
Single pass scan
36-bit color (24-bit to PC)
12-bit grayscale (8-bit to PC)
Data compression (quality or speed mode)
8.5-Inch x 11.7-Inch maximum (A4 size) scanning area
Parallel Port EPP interface with a printer pass-through feature
Euro sign ready (Textbridge Classic 2.0 OCR application software)
Removable flatbed cover

Technical Information

Unit weight    3.5kg (7.7lb) including adapter

Unit size    3.8-Inch high x 17.5-Inch long x 11.6-Inch wide

   (95.5mm x 445.2mm x 295.2mm)

(Gray color) Parallel port cable (4.0-ft)

Unit weight	3.5kg (7.7lb) including adapter
Unit size	3.8-Inch high x 17.5-Inch long x 11.6-Inch wide
	(95.5mm x 445.2mm x 295.2mm)

(Gray color) Parallel port cable (4.0-ft)

Solving Problems

Green light on switch    This is normal during scanning or when the scanner

is blinking    buttons are enabled in EZ Station.

Software will not    You must have an administrator account to install

install on Windows NT    the scanner software.

No scanner power    Verify that the green light on the scanner sitch is on.

Scanner does not respond    Reset the computer (turn it off and on).

   Be sure that the imaging application Select a Source

   parameter is set to IBM Scanner (011).

   Check for proper attachment of all scanner cables. Reattach cables

   if necessary.

   Your scanner will not operate if you have connected the scanner

   cable to your computer serial port.

Scanner buttons do    Be sure that the EZ Station applications is running on the desktop.

not work    Be sure that you have selected Enable Buttons on the

   EZ Station window.

   Firmly press and hold button for approximately one second.

Poor quality scan image    Check the Windows display properties. Set color palette to

on your screen.    16-bit or 24-bit

Vertical lines in the    Clean the scanning glass, scan again, and recheck the image.

scan image
Image too dark or to light    Check the contrast and brightness settings in the TWAIN program.

Scanned image is    Check the software brightness adjustment in the TWAIN program.

solid black
No scan image on    Check the scanner power and attached cables.

the monitor
Scanner scans very    Try setting the resolution of the scanner between 100 and

slowly    300 dpi. Too high a setting slows down performance.

   Set the Parallel Port Mode to EPP (CPU-BIOS settings.)

   (enhanced parallel port).

   Set the scan speed in the TWAIN program to seed mode

Mouse cursor seems slow    Go to the EZ Station application and Disable the scanner buttons.

Cannot print to printer    Check that the printer cable is properly secured to the printer and scanner.

   Make sure the printer is turned on. Try disabling the EZ station buttons by

   selecting Disable Buttons on the EZ Station panel.

Mouse, keyboard, or    Upgrade the printer port or controller to an EPP interface.

diskette drive does    Change the BIOS settings to EPP and the EPP address to 278 or 378.

not work.
Scanner light source    The scanner light source is designed to stay on all the time.

stays on all the time    Use the scanner power switch to turn off the scanner light.

Green light on switch	This is normal during scanning or when the scanner
is blinking	buttons are enabled in EZ Station.

Software will not	You must have an administrator account to install
install on Windows NT	the scanner software.

No scanner power	Verify that the green light on the scanner sitch is on.

Scanner does not respond	Reset the computer (turn it off and on).
	Be sure that the imaging application Select a Source
	parameter is set to IBM Scanner (011).

	Check for proper attachment of all scanner cables. Reattach cables
	if necessary.
	Your scanner will not operate if you have connected the scanner
	cable to your computer serial port.

Scanner buttons do	Be sure that the EZ Station applications is running on the desktop.
not work	Be sure that you have selected Enable Buttons on the
	EZ Station window.
	Firmly press and hold button for approximately one second.

Poor quality scan image	Check the Windows display properties. Set color palette to
on your screen.	16-bit or 24-bit

Vertical lines in the	Clean the scanning glass, scan again, and recheck the image.
scan image
Image too dark or to light	Check the contrast and brightness settings in the TWAIN program.

Scanned image is	Check the software brightness adjustment in the TWAIN program.
solid black
No scan image on	Check the scanner power and attached cables.
the monitor
Scanner scans very	Try setting the resolution of the scanner between 100 and
slowly	300 dpi. Too high a setting slows down performance.
	Set the Parallel Port Mode to EPP (CPU-BIOS settings.)
	(enhanced parallel port).
	Set the scan speed in the TWAIN program to seed mode

Mouse cursor seems slow	Go to the EZ Station application and Disable the scanner buttons.

Cannot print to printer	Check that the printer cable is properly secured to the printer and scanner.
	Make sure the printer is turned on. Try disabling the EZ station buttons by
	selecting Disable Buttons on the EZ Station panel.

Mouse, keyboard, or	Upgrade the printer port or controller to an EPP interface.
diskette drive does	Change the BIOS settings to EPP and the EPP address to 278 or 378.
not work.
Scanner light source	The scanner light source is designed to stay on all the time.
stays on all the time	Use the scanner power switch to turn off the scanner light.

Back to

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.